Function Setting Of Interface; Prepare For Power On; Power On/Off; Battery Indication - King-Meter WH527-LCD User Manual

K I N G - M E T E R s p e c i f i c a t i o n o f W H 5 2 7 - L C D d i s p l a y

6. Function Setting of Interface

6.1 Prepare for Power On

Ensure the connector joint fix before power on display, and power
on the battery of e-bike.
6.2

Power on/off

Press
normally, and the controller will power on at the same time.
With display on，press
display will leave off battery ，the leakage current of display on is less
than 1μA.

6.3 Battery Indication

When the battery is in high voltage the 5 level all light on，when
the battery is in low voltage, battery frame will flash to notice that the
battery needs to be recharged immediately.
Button for 2-3 seconds then the display will work
>2s ， the display will shut down ，the
Low Voltage Flash
7/20
v 1 . 0