Boost Mode (Depending On Model) - AQUALUX DUO Electrolyse + pH 105448 Installation And Care Instruction

BOOST MODE (depending on model)

6
Allows pushing quickly the chlorine production to the maximum, in case of exceptionally high frequentation,
abundant rains, of cloudy water and that any other factor pulling a greater need of chlorine.
The production settles to the 10 (100 %) position, automatically during the remaining filtration time for the day or
for 24 hours; in case of continued functioning of the filtration. The BOOST mode is not available if the production is
settling to the 0 position (0 %).
 Put the filtration in "Hand mode" during 24 hours.
 Select electrolysis display.
 Press on time on the key , , to activate the BOOST mode. The device shows « bo ».
The key V (depending on model) allows stopping the BOOST mode at any time.
The boost mode is a preventive and not curative mode!
It is not possible to replace it by a classical shock treatment in the case of water of swimming pool unfit for the
bathing.
DUO AQUALUX – PAPI004070 – FR – EN – DE – Rev.03.16
V
12