Information And Explanation Of Symbols - Sonova Dicsover Moxi Fit Series Manual

Cause
Issue: mobile phone calls not being heard through
hearing aids
Hearing aids are in flight
mode
Hearing aids are not
paired to the phone
For any problems not listed in the guide, contact your
hearing care professional.
44
Possible remedy
Exit flight mode: open
battery door, then close
battery door
Pair your hearing aids to your
mobile phone (again)

Information and explanation of symbols

With the CE symbol, Unitron Hearing confirms that this
Unitron product – including accessories – meets the
xxxx
requirements of the Medical Devices Directive
93/42/EEC as well as the Radio Equipment
Directive 2014/53/EU on radio and telecommunications
transmitters.
The numbers after the CE symbol correspond to the
code of certified institutions that were consulted under
the above-mentioned directives.
This symbol indicates that it is important for the user to
read and take into account the relevant information in
this user guide.
This symbol indicates that it is important for the user
to pay attention to the relevant warning notices in this
user guide.
Important information for handling and effective use of
the product.
This symbol indicates that the products described in
these user instructions adhere to the requirements for
an application part of Type B of EN 60601-1. The surface
of the hearing aid is specified as applicated part of
Type B.
©
Copyright symbol
45