Vessel Alarms; Ais Target Symbols - Lowrance Elite FS 7 User Manual

• Save the waypoint
- The waypoint is saved to your waypoint list. This waypoint
name is prefixed with MOB AIS SART - followed by the unique
MMSI number of the SART. For example, MOB AIS SART -
12345678.
• Activate the MOB function
- The display switches to a zoomed chart panel, centered on the
AIS SART position
- The system creates an active route to the AIS SART position
Ú Note:
If the MOB function is already active, this will be
terminated and replaced by the new route towards the AIS
SART position.
Ú Note:
If the AIS stops receiving the AIS SART message, the AIS
SART remains in the vessels list for 10 minutes after it receives
the last signal.

Vessel alarms

You can define several alarms to alert you if a target shows up
within predefined range limits, or if a previously identified target is
lost.

AIS target symbols

Safe AIS target with course extension line turned off.
Bold lines indicates dangerous AIS target.
AIS| ELITE FS User Manual
153