148
MARPA alarm settings
You can define the following MARPA alarms:
MARPA target lost
•
Controls whether an alarm is activated when a MARPA target is
lost.
MARPA unavailable
•
Controls whether an alarm is activated if you do not have the
required inputs for MARPA to work (valid GPS position and
heading sensor connected to the radar server).
You can also set up a guard zone around your vessel and when a
target comes with in this zone, an alarm can be triggered. For more
information, refer to Marpa settings under "Radar settings" on page 148.
Radar settings
This section only lists user settings, for installation settings refer to
"System setup" on page 197.
Radar| ELITE FS User Manual