Fastening The Control Cables And Covers; Installation Of Option Modules And Pc; Fibre Optic Link - ABB ACS800 Series Hardware Manual
Hide thumbs
Also See for ACS800 Series:
- Firmware manual (340 pages) ,
- Hardware manual (210 pages) ,
- Cabinet installation and operating instruction (162 pages)
Table of Contents
Advertisement
76
Fastening the control cables and covers
When all control cables are connected, fasten them together with cable ties. Units
with a connection box: fasten the cables to the entry plate with cable ties. Units with
a gland box: tighten the clamping nuts of the cable glands.
Fasten the connection box cover.
Replace the front cover.
Installation of option modules and PC
Option modules (such as fieldbus adapter, I/O extension module and the pulse
encoder interface) are inserted in the option module slots of the RMIO board (see
Connecting the control
module manual for cable connections.
Fibre optic link
A DDCS fibre optic link is provided via the RDCO option module for PC tools,
master/follower link and the AIMA-01 I/O module adapter. See chapter
03/04 DDCS communication option modules
Observe colouring codes when installing fibre optic cables. Blue connectors go to
blue terminals, and grey connectors to grey terminals.
Electrical installation
cables) and fixed with two
US cover
screws.
See the appropriate option
on page
169
for the connections.
RDCO-01/02/
Advertisement
Table of Contents
