Manitou F-E3 Series Operator's Manual page 117

13 - HYDRAULIC ATTACHMENT LOCKING
Enables the attachment to be locked onto the carriage and a hydraulic attachment to be
used by the same hydraulic circuit.
ATTACHMENT LOCKING CONTROL
- Set valve 1 to position A and place switch 2 in position B (indicator light on).
- Push button 3 forward to lock the attachment and backward to release it.
After locking the attachment, return switch 2 to position A (indicator light off) to prevent accidental
release of the attachment.
HYDRAULIC ATTACHMENT CONTROL
- Set valve 1 to position B and press switch 2 in
position B (indicator light on).
- Push button 3 forward or backward.
14 - JIB HEAD ELECTROVALVE + HYDRAULIC ATTACHMENT LOCKING
The addition of these two options on the attachment line allows two hydraulic functions
to be used and locks the attachment onto the carriage.
To make connection of the rapid connectors easier, decompress the hydraulic circuit by pressing
button 1 on the electrovalve.
ATTACHMENT LINE L1 CONTROL
- Set switch 2 to position A (indicator light off).
- Push button 3 forward or backward.
ATTACHMENT LINE L2 CONTROL + HYDRAULIC ATTACHMENT LOCKING
LOCKING AN ATTACHMENT
- Set valve 4 to position A.
- Set switch 2 to position B (indicator light on).
- Hold button 5 down and push button 3 forward to lock
the attachment and backward to release it.
Once the attachment is locked, return valve 4 to position B
to prevent accidental release of the attachment.
HYDRAULIC ATTACHMENT
- Set switch 2 to position B (indicator light on).
- Hold button 5 down and push button 3 forwards
or backwards.
B
2
A
A
2
B
2-85
A
B
1
3
A
4
B
L1
L2
L1
L2
1
3
5