Manitou F-E3 Series Operator's Manual page 116

10 - ATTACHMENT EASY HYDRAULIC CONNECTION
For easily connecting and disconnecting the attachment.
OPERATION
- Switch on lift truck ignition.
- Press for two seconds on push-button 1 to release the attachment circuit hydraulic
pressure.
- Connect or disconnect the rapid connectors of the hydraulic attachment (see: 4 - OPTIONAL
ATTACHMENTS FOR USE WITH THE RANGE: PICKING UP THE ATTACHMENTS).
11 - PROVISION FOR ELECTRICAL JIB
Enables an electrical function to be used at the head
of the jib foot.
ELECTRIC JIB FUNCTION CONTROL
- Set switch 1 to position B (indicator light on).
- Hold button 2 down and button 3 forwards
or backwards.
NOTE: Set switch 1 to position A (indicator light
off) controls the hydraulic attachment line
(see: 2 - DESCRIPTION: 20 - HYDRAULIC AND
TRANSMISSION CUT-OFF CONTROLS).
12 - JIB HEAD ELECTROVALVE
Enables use of two hydraulic functions on the attachment circuit.
To make connection of the rapid connectors easier, decompress the hydraulic circuit by pressing
button 1 on the electrovalve.
ATTACHMENT LINE L1 CONTROL
- Set switch 2 to position A (indicator light off).
- Push button 3 forward or backward.
ATTACHMENT LINE L2 CONTROL
- Set switch 2 to position B (indicator light on).
- Hold button 4 down and push button 3 forwards or
backwards.
A
1
B
A
2
B
2-84
1
3
2
L1
L2
L1
L2
1
3
4