Selecting Fm Mode; Scan Settings - TechniSat DIGITRADIO 301 IR Instruction Manual

1. While playing your favourite station, press and hold PRESET button until display shows as below:
2. Turn SCROLL/SELECT/SNOOZE knob to cycle through the preset numbers 1-10.
3. Select one preset number and then press the SCROLL/SELECT/SNOOZE knob, display will show "Preset
stored".
4. Preset number "P#" will show on the display.
7.10 Recalling a Preset Station
1. Press PRESET button to show the saved preset stations.
2. Turn SCROLL/SELECT/SNOOZE knob to select the preset station you want to play and then press the
SCROLL/SELECT/SNOOZE knob to confirm.
34
8 FM Mode

8.1 Selecting FM Mode

1. Press MODE button repeatedly to select FM mode.
2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise, the last
listened FM station will be selected.
3. To manually change the FM frequency, while FM frequency shows up, turn SCROLL/SELECT/SNOOZE
knob clockwise or anticlockwise to change the frequency by 0.05MHz per step.
4. To automatically scan, while FM frequency shows up, turn SCROLL/SELECT/SNOOZE knob clockwise or
anti-clockwise and then press SCROLL/SELECT/SNOOZE knob, your radio will skip forward or backward
until it reached the next available station.

8.2 Scan settings

This enables you set FM scans stop at stations with strong signal or stop at any available station.
1. To change the scan settings to stop only at stations with good signal strength, press MENU button, turn
SCROLL/SELECT/SNOOZE knob to select "Scan setting", and then press SCROLL/SELECT/SNOOZE knob
to confirm.
2. Display will show "Strong stations only?", turn SCROLL/SELECT/SNOOZE knob to select "YES", and
then press SCROLL/SELECT/SNOOZE knob to confirm. The scans stop only at stations with good signal
strength.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
35