TechniSat DIGITRADIO 301 IR Instruction Manual page 22

Dab+/ukw/internet radio
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
9.10 Setting Backlight
This radio display has a backlight with adjustable brightness level and adjustable timeout (this is the time delay,
in seconds, after which the display switch to set backlight level of Standby level).
1.
Press MENU button - System settings - Backlight, press SCROLL/SELECT/SNOOZE knob to confirm.
2.
Turn SCROLL/SELECT/SNOOZE knob to select through "Time out", "Power-On level" and "Standby level",
then press SCROLL/SELECT/SNOOZE knob to confirm.
3.
Turn SCROLL/SELECT/SNOOZE knob to select backlight level and backlight timeout, and then press
SCROLL/SELECT/SNOOZE knob to confirm the setting.
Timeout
On/10/20/30/45/60/90/120/180 sec
Power-On level
Standby level
9.11 Troubleshooting
If a problem occurs, it may often be due to something very minor. The following table contains various tips.
Problem
No Power.
42
High
Medium
Low
Medium
Low
Off
Solution
Ensure the mains cable is properly connected or
battery power is not used up.
Make sure that the unit is turned on.
The unit does not
The unit may freeze up during use. Switch the unit
respond when pressing
off and then on again to reset it.
any buttons.
Cannot find my network.
Make sure the Wi-Fi router is plugged in and
working.
Reconnect the radio to your Wi-Fi.
Check you radio is within 5m of your router.
Poor radio reception.
Make sure the antenna is fully extended.
Electrical interference in your home can cause
poor reception. Move the unit away from them
(especially those with motors and transformers).
Desired station not
Weak signal. Search manually.
found.
If any functional abnormality is encountered, unplug the unit from the mains socket and reconnect it again.
10 Specifications
Model:
Input:
Output:
Information on Power Consumption
Time interval for power management function
switched to unit automatically into standby:
DigitRadio 301 IR
AC 100-240V, 50-60Hz
DC 9V 1000mA
Operation Mode: 9W (Max)
Standby Mode: < 1W
Switch to standby mode after 15
minutes after intended use
EN
FR
IT
NL
NW
DK
PL
CZ
SK
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

0000/4996

Table of Contents