TechniSat DIGITRADIO 301 IR Instruction Manual page 9

Skip WPS In addition to a WPS connection, you can also
establish a connection using a Pre-Shared-Key. The
required key is often on the rear of the router, or
you may have defined it yourself.
This method is used automatically for networks
without WPS. You can call up the Pre-Shared-Key
function on networks with WPS by selecting menu
item "Skip WPS".
An input field should now appear. You can enter
the required key (PSK) by turning and pressing
SCROLL/SELECT/SNOOZE knob, and then select
"OK" and press SCROLL/SELECT/SNOOZE knob
complete the entry. The radio should now establish
the connection to the network.
5. Setup wizard completed, press SCROLL/SELECT/SNOOZE knob again to exit.
16
5 Internet Radio Mode
1. The display will show "Main menu" after "Setup wizard" completed. Press SCROLL/SELECT/SNOOZE knob
to select Internet radio mode.
2. While "Station list" is highlighted, press SCROLL/SELECT/SNOOZE knob to confirm.
3. Then refer following section to choice stations. Or if failed to connect to network, please follow:
a. Check your Router, see it working normally or not;
b. Relocate your radio to a stronger signal position is necessary.
c. Make sure your password is correct input.
5.1 Local "Country"
Local "Country" will change according to your current location (e.g. Local Australia). It displays local stations of
your current location.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
17