Dimplex DF28L-PRO Owner's Manual page 13

Operation
Icon Function
F
Brightness
G
Flame
H
Timer
Resetting the Temperature
Cutout Switch
Should the heater overheat, an
automatic cutout will turn the heater off.
It will not come back on without being
reset.
To reset the cutout switch, unplug the
unit and wait 5 minutes before plugging
it back in.
CAUTION: If you need to
continuously reset the heater,
unplug the unit and call Technical
Support at 1-888-346-7539
Dimplex Fireplace DF28L-PRO / DF28DWC-PRO / DF26L-PRO / DF26DWC-PRO
Description
Press to change the flame and logs brightness.
Display will show b3, b1, b2 respectively.
• High
• Low
• Medium
Press to turn the flame effect On. Press again to
turn the flame effect Off.
Press multiple times to change the sleep timer
by 0.5 h from 0.5 h to 8 h before turning off.
Press again, the remaining time on the timer
displays.
13