Dimplex DF28L-PRO Owner's Manual page 12

Operation
Icon Function
Disable Heat
C /
°
D
Flame Speed
E
Color Themes
12
Description
Press the Heat and Temp buttons on the unit at
the same time and hold for 2 second to disable
the heater. Press and hold again for 2 seconds
to enable the heater.
When the heater is disabled, "--" will display
when Temp button is pressed. The remainder
of the unit's controls will operate in the same
fashion.
F Temp The display can show the temperature reading
°
in either
and hold the Temp and Flame Speeds buttons
on the unit.
Press multiple times to toggle through flame
speeds (minimum, medium, maximum). Display
will show current speed number (F1, F2, F3
respectively).
Press multiple times to change the media and
flame base colors. This feature is active only
when the flame effect is On. Display will show
theme (t0, t1, t2, etc.)
DF28L-PRO or DF26L-PRO (Log Unit) themes:
• Theme t0 - No flame
• Theme t1 - Natural (flame base off)
• Theme t2 - Red Highlights (flame base red/
• Theme t3 - Blue Highlights (flame base blue)
DF28DWC-PRO or DF26DWC-PRO (Media Unit)
themes:
• Theme t0 - Midnight Mode
• Theme t1 - Media White
• Theme t2 - Media red/orange flickering
• Theme t3 - Media blue flickering.
• Theme t4 - Media Purple
• Theme t5 - Media Green
• Theme to - Prism Mode (To choose a custom
C or F. To change the display, press
° °
orange)
color, press Brightness icon. Press again to
return to Prism Mode)
www.dimplex.com