System Setting - GE Druck TRX-II User Manual

System Setting

Setting the backlight automatic mode
Leave the cursor at NONE at the measure and source menu and
press the # and EXE keys simultaneously to open the set-up menu.
Select system and press EXE.
Select BACKLIGHT and press EXE. Select required time or
backlight timer MODE OFF and press EXE. Press CE to leave the
set-up screen.
Note: Not applicable to Model TRX-II iS.
Backlight on/off operation
Press the Light key to switch the backlight on. When e.g. 30 seconds
is selected the light will remain ON for maximum 30 seconds. Each
key-pad operation will postpone shut-off for another 30 seconds time
period. Timer Mode Off enables manual operation of the backlight.
Note: It is recommended to select 30 seconds to save batteries if the
unit is mainly used in the field.
Clear keystroking
Leave the cursor at NONE at the measure and source menu and
press the # and EXE keys simultaneously to open the set-up menu.
Select CLEAR KEYSTROKING and press EXE. EXE will clean the
KEYSTROKE memory. Press CE to leave the set-up menu.
K319 Issue 2 EN-11