Emptying The Bin; Care And Maintenance Instructions; Cleaning The Filter - iRobot Roomba i7 Owner's Manual

Care and Maintenance

Care and Maintenance Instructions

To keep your robot running at peak performance, perform the
procedures on the following pages.
There are additional instructional videos in the iRobot HOME App. If you
notice the robot picking up less debris from your floor, empty the bin,
clean the filter, and clean the brushes.
Part Care Frequency
Bin Wash bin as needed
Filter Clean once a week (twice
a week if you have a pet).
Do not wash.
Full Bin Sensor Clean every 2 weeks
Front Caster Clean every 2 weeks
Wheel
Edge-Sweeping Clean once a month (twice
Brush and Multi- a month if you have a pet)
Surface Brushes
Sensors and Clean once a month
Charging
Contacts
Note: iRobot manufactures various replacement parts and assemblies. If
you think you need a replacement part, please contact iRobot Customer
Care for more information.
* Replacement frequency may vary. Parts should be replaced if visible wear
appears.
Replacement
Frequency*
Every 2 months
Every 12 months
Every 12 months

Emptying the Bin

1
Press bin release
button to remove bin.
2
Open bin door to empty bin.
3
Place bin back in the robot.

Cleaning the Filter

1
Remove the bin. Remove the
filter by grasping both ends
and pulling out.
2
Remove debris by tapping
the filter against your trash
container.
3
Reinsert filter with ridged
grips facing out. Place bin
back in the robot.
Important: The robot will not run if
the filter is not installed correctly.
Replace the filter every two months.