iRobot Roomba i7 Owner's Manual page 3

Cleaning the Full Bin Sensors
1
Remove and empty the bin.
2
Wipe the inner sensors with a clean,
dry cloth
3
Wipe the bin door with a clean, dry cloth.
Closed Door
Opened Door
Washing the Bin
Important: Do not wash the filter. Remove
the filter before washing the bin.
1
Release the bin, remove the filter,
and open the bin door.
2
Rinse the bin using warm water.
Note: Bin is not dishwasher safe.
3
Make sure bin is completely dry. Reinsert
filter and place bin back in the robot.
Cleaning the Edge-Sweeping Brush
1
Use a coin or small screwdriver to
remove the screw holding the Edge-
Sweeping Brush in place.
2
Pull to remove the Edge-Sweeping
Brush. Remove any hair or debris, then
reinstall the brush.