Flow Meter - lopital Amfora Instructions For Use Manual

Shower / disinfecting unit
Table of Contents

Advertisement

In the event of contact with disinfectant
Contact with the skin
After coming into contact with the skin, immediately wash the area with water.
Contact with the eyes
If the product goes into the eyes, keep the eyes open and immediately splash with
plenty of water, rinse for at least 5 minutes. Subsequently consult an ophthalmologist.
Digestion
Rinse the mouth with water. Do not allow the victim to vomit. If the symptoms persist,
consult a doctor.
For agents other than Neoquat-Combi
Check the safety instructions page of the product that you are intending to use.

Flow meter

The flow meter is used to adjust the mixture ratio between water and disinfectant and is
located on the inside of the unit, behind the locked flap.
The flow meter has to be adjusted when the Amfora is being installed, and each time
that you are intending to use a different type or brand of disinfectant. It will be easier to
reach the flow meter if you remove the left-hand reservoir of the soap pump.
8 | Instructions for use | Shower / disinfecting unit 'Amfora'
:
®
Flow meter
The ball shows the level
Black adjusting button

Advertisement

Table of Contents
loading

Table of Contents