lopital Amfora Instructions For Use Manual page 7

Shower / disinfecting unit
Table of Contents

Advertisement

• Rinse the surface clean (the temperature of the water may be either cold or warm).
• Close the shower tap and slightly press the black button of the white hand-held
shower to depressurise the hose.
• Hang the white hand-held shower back on the holder.
• After disinfecting, throw away the cleaning materials, or wash them at a temperature
of at least 60°C.
Important: make sure that the hoses never lie on the floor, as this could
result in them being run over or someone tripping over them.
Disinfectant tap
Disinfectant shower
Safety tap
Mistakes that are made frequently
Please study these so that the same mistakes can be avoided:
Mistake
Inadequate cleaning
Soaking time not long enough
Dose too low
Dose too high
Disinfectant not suitable
Moisture present before disinfecting
Shower / disinfecting unit 'Amfora' | Instructions for use | 7
Consequence
Neutralisation of the disinfectant
Disinfectant only partially effective
Low disinfecting effect, build up resistance
Residue problems, corrosion
Inadequate disinfection, discolouration
Change of concentration of disinfectant

Advertisement

Table of Contents
loading

Table of Contents