Controls And Functions; Front Panel; Remote Control Sensor - Yamaha Digital Sound Projector YSP-3050 Owner's Manual

Front panel

1
AUX 3
1 AUX 3 input jack
Connect your portable audio player (see page 22).
2 INTELLIBEAM MIC jack
Connect the supplied IntelliBeam microphone for AUTO
SETUP (see page 30).

3 Remote control sensor

Receives infrared signals from the remote control.
4 Front panel display
Shows information about the operational status of this
unit.
5 INPUT
Press repeatedly to switch between input sources (see
page 39).

Controls and functions

3
2
INTELLIBEAM MIC
4
5 6
+
INPUT
VOLUME
6 VOLUME +/–
Controls the volume level of all audio channels (see
page 41).
7 STANDBY/ON
Turns on the power of this unit or sets it to the standby
mode (see page 25).
Notes
• When you turn on this unit, you will hear a click sound
followed by the 4 to 5-second interval before sound
reproducing.
• In the standby mode, this unit consumes a small amount of
power in order to receive infrared signals from the remote
control or to search for HDMI signals.
Controls and functions
7
STANDBY/ON
7
En