Input Menu - Yamaha Digital Sound Projector YSP-3050 Owner's Manual

MANUAL SETUP

INPUT MENU

Use to manually adjust the various parameters related to
the audio and video input.
SET MENU → MANUAL SETUP → INPUT MENU
3)INPUT MENU
.
A)INPUT ASSIGNMENT
B)INPUT MODE
C)INPUT TRIM
D)INPUT RENAME
E)HDMI SET
F)XM ANTENNA LEVEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
■ INPUT ASSIGNMENT (Input assignment)
Use to assign the HDMI IN jacks of this unit to other
components if the initial settings of this unit do not
correspond to your needs. By assigning other components
to the HDMI IN jacks of this unit, you can display the
names of the connected components in the front panel
display and OSD and operate the components with the
input selector buttons of the same name. If you connect a
component to one of the HDMI IN jacks of this unit and
do not assign a name to it, the default component name for
HDMI IN jack is displayed in the front panel and OSD
when selected.
• Select HDMI1 to assign a component to the HDMI
AUX 1 IN jack of this unit.
Choices: TV/STB, DVD, AUX1, AUX2
• Select HDMI2 to assign a component to the HDMI
DVD IN jack of this unit.
Choices: DVD, AUX1, AUX2, TV/STB
•
A)INPUT ASSIGNMENT 1/3
.
HDMI1;;;;
HDMI2;;;;
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
•
82
En
HDMI
TV/STB
( TV/STB )
DVD
( DVD )
p p
• Select COMPONENT to assign a component to the
COMPONENT VIDEO INPUT jack of this unit.
Choices: DVD, AUX1, AUX2, TV/STB
•
A)INPUT ASSIGNMENT 2/3
COMPONENT
.
Line1;;;;
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
•
• Select COMPOSITE to assign a component to the
VIDEO INPUT jack of this unit.
Choices: TV/STB, DVD, AUX1, AUX2
A)INPUT ASSIGNMENT 3/3
COMPOSITE
.
Line2;;;;
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
■ INPUT MODE (Input mode)
Use to designate the input mode for the input sources
connected to the DIGITAL INPUT jacks when you turn on
the power of this unit. For information on the types of
audio signals that can be output by this unit, see "Selecting
the input mode" on page 90.
Choices: AUTO, LAST
B)INPUT MODE
p
AUTO
p
[ ]/[ ]:Select
[ENTER]:Return
• Select AUTO to set this unit to automatically detect the
type of input signals and select the appropriate input
mode.
• Select LAST to set this unit to automatically select the
last input mode used for that input source. If the type of
input signals is different from the setting, no sounds
will be produced.
DVD
( DVD )
p p
TV/STB
( TV/STB )
p p
LAST
p