Yamaha Digital Sound Projector YSP-3050 Owner's Manual page 103

■ Setting macros for the TV without the
tuning capability
1
Press and hold CODE SET and press one of
the input selector buttons to select the input
source you want to set macros for.
Proceed to step 2 while holding down CODE SET.
TV MUTE
While holding
down, press
CODE SET
2
Press MACRO while holding down CODE
SET.
TV MUTE
While holding
down, press
CODE SET
3
Press INPUT1.
Check that the TV screen changes to the input 1
screen.
INPUT1
4
Press TV INPUT repeatedly until the screen
changes to the display of the input source
selected in step 1.
TV INPUT
5
Press ENTER to confirm the setting.
ENTER
■ Operating macros
Press and hold one of the input selector buttons
for approximately two seconds to select the input
source you want to operate macros for.
The TV input changes at the same time the input mode
changes.
DVD AUX1 AUX2
STB
■ Canceling the macros
1
MACRO
2
3
DVD AUX1
STB
Press and hold CODE SET and press one of
the input selector buttons to select the input
source you want to cancel the macros for.
Proceed to step 2 while holding down CODE SET.
TV MUTE
While holding
down, press
CODE SET
Press MACRO while holding down CODE
SET.
TV MUTE
While holding
down, press
CODE SET
Press ENTER to cancel the macros.
ENTER
Remote control features
AUX2
DVD AUX1 AUX2
STB
MACRO
99
En