Controls And Functions; Front Panel - Yamaha YSP-900 Owner's Manual

CONTROLS AND FUNCTIONS

Front panel

1 OPTIMIZER MIC jack
Use to connect the supplied optimizer microphone to be
used to run AUTO SETUP (see page 28).
2 Front panel display
Shows information about the operational status of this
unit.
3 Remote control sensor
Receives infrared signals from the remote control.
4 INPUT
Press repeatedly to switch between input sources (TV,
VCR, DVD or AUX). See page 37 for details.
Outputs a test tone to experience the sound beam (see
page 68).
5 VOLUME –/+
Controls the volume level of all audio channels (see
page 39).
6
En
CONTROLS AND FUNCTIONS
1 2
4
INPUT
3
5
+
VOLUME
6 STANDBY/ON
Turns on the power of this unit or sets it to the standby
mode (see page 23).
Notes
• When you turn on the power of this unit, you will hear a click
and there will be a 4 to 5-second delay before it can reproduce
sound.
• In the standby mode, this unit consumes a small amount of
power in order to receive infrared-signals from the remote
control.
6
STANDBY/ON