Using The Audio Output Being Played Back - Yamaha Digital Sound Projector YSP-3050 Owner's Manual

Adjusting the audio balance
5
Press TEST when you have completed all
your adjustments.
Notes
• All channel levels cannot be adjusted when the 2-channel or 5-
channel stereo playback (see page 62), My Beam (see page 63),
or My Surround (see page 57) is selected as the beam mode.
• "FRONT L/R" cannot be adjusted when Stereo plus 3 Beam is
selected as the beam mode (see page 57).
• "FRONT L/R" are automatically adjusted depending on the
settings of the other channels when Stereo plus 3 Beam or
stereo playback is selected as the beam mode (see pages 57 and
62).
y
If the level of a particular channel cannot be adjusted, "– –dB"
appears in the front panel display.
Using the audio output being
played back
You can also manually adjust the channel levels while
playing back an input source such as a DVD.
ENHANCER
CAT/
A-E
DISPLAY
VOLUME
MUTE
CH LEVEL
88
En
TEST
MENU
ENTRY
TV/AV
ENTER
YSP
RETURN
CH TV VOL
TV INPUT TV MUTE
CODE SET
TEST
1
Set the operation mode selector to YSP.
TV/AV
2
Press CH LEVEL repeatedly (or press
CH LEVEL and
you want to adjust.
The front panel display changes as follows.
CH LEVEL
CH LEVEL
Note
"SWFR" is available only when a subwoofer is connected to
this unit and SUBWOOFER is selected for BASS OUT in
SOUND MENU (see page 80).
YSP
/ ) to select the channel
or
ENTER
FRONT L +1.0dB
CENTER -2.5dB
FRONT R +1.0dB
SUR.R +2.0dB
SUR.L +2.0dB
SWFR --dB