Before Connecting Components - Yamaha Digital Sound Projector YSP-3050 Owner's Manual

Before connecting components

■ Cables used for connections
Audio/Video
A
HDMI cable
Audio
Audio pin cable (supplied)
(White)
(Red)
Optical cable (supplied)
Digital audio pin cable (supplied)
(Orange)
3.5 mm stereo mini plug cable
5
Subwoofer pin cable
Video
OSD video pin cable (supplied)/ Video pin cable
(Yellow)
Component video pin cable
(Green)
(Blue)
(Red)
■ Notes on connecting the optical cable
• Pull out the cap before connecting the optical cable.
When you are not using the optical cable, be sure to put the cap
back in place.
• When inserting the cable into the optical digital jack, make sure
the direction is correct.
Cap
■ Affixing cables
To prevent cables from becoming unplugged, place the supplied
cable clamp with the open side facing upward, attach it to the rear
panel of this unit in a suitable position, and then affix cables in
the cable clamp.
■ Information on HDMI™
(White)
Audio signals
(Red)
Input source
DVD video
DVD audio
Blu-ray Disc
HD DVD
(Orange)
Notes
• When CPPM copy-protected DVD audio is played back, video and
audio signals may not be output depending on the type of DVD player.
• This unit is not compatible with HDCP-incompatible HDMI or
DVI components.
y
• We recommend that you use an HDMI cable shorter than 5 m
(16 ft) with the HDMI logo printed on it.
• Use a conversion cable (HDMI jack
this unit to other DVI components.
■ Priority order for audio input signals
When multiple types of audio signals are simultaneously
being input from a single source component, this unit
(Yellow)
plays back the audio signals in the following priority
order: HDMI → Digital → Analog
As default settings, the following input jacks are assigned
to the corresponding input sources:
(Green)
Input
jack
(Blue)
Input
(Red)
source
TV/STB
DVD
AUX 1
AUX 2
AUX 3
Note
This unit is compatible with 2-channel PCM signals, but not with
multi-channel PCM signals.
Connections
Optical cable
Attach to this unit
Audio signal type
Dolby Digital, DTS, PCM
2-channel stereo
(up to 96 kHz/24 bit)
Dolby Digital, DTS, PCM
↔
DVI-D jack) to connect
HDMI Digital
✔ ✔
✔ ✔
✔
✔
Analog
✔
✔
✔
17
En