Using A Metal Wall Bracket; Using A Rack; Affixing This Unit; Using A Stand - Yamaha Digital Sound Projector YSP-3050 Owner's Manual

■ Using a metal wall bracket

You can use the optional metal wall bracket to mount this
unit on the wall in your listening room.
This unit
YSP-3050
65 325
24- 7x22
SPM-K30 (Option)
y
Refer to the instructions supplied with the metal bracket for
details on how to attach the metal bracket to the wall or how to
attach this unit to the metal bracket.

■ Using a stand

You can mount your TV on a stand placed on a
commercially available rack and install this unit under
your TV.
TV
This unit
y
Refer to the instructions supplied with the stand for details on
how to install the stand or how to mount the TV on the stand.
Metal wall bracket
TV
325 65
4- 7
670
(mm)
Stand

■ Using a rack

You can install this unit either above or under your TV in a
commercially available rack.
When this unit is installed above your TV
When this unit is installed under your TV
Note
Make sure that the rack is large enough to allow adequate
ventilation space around this unit (see page 13) and that it is
strong enough to support the weight of both this unit and your TV.

■ Affixing this unit

Peel off the film from each of the four supplied fasteners
and then secure them to the bottom four corners of this
unit and the top of the rack, etc.
This unit
Fasteners
Notes
• Do not install this unit on top of a slanted surface. This unit may
fall over and cause injury.
• Make sure you wipe the surface of the rack, etc. before securing
the fasteners. Applying the tape to a dirty or wet surface will
weaken the sticking power of the tape, and this unit may fall as
a result.
Installation
Peel off
2
the film
1
15
En