Yamaha Digital Sound Projector YSP-3050 Owner's Manual page 15

F DVD player/VCR control buttons
Control your DVD player or VCR (see pages 95 and 97).
G My Beam microphone
Collects the test tones from this unit when using the My
Beam auto-adjust function (see page 63).
H TV POWER
Turns on or off the power of your TV (see page 95).
I AV POWER
Turns on or off the power of the selected component (see
pages 95 and 97).
J INPUT1
Switches the input source on your TV (see page 95).
K MACRO
Use to set the TV macro (see page 98).
L a /5
Switches the preset station number (1 to 8) when this unit
is receiving an FM broadcast or XM channel (see
page 46).
M CAT
Switches the preset station group (A to E) when this unit is
receiving an FM broadcast or XM channel (see page 46).
N SLEEP
Sets the sleep timer (see page 70).
O INPUTMODE
Toggles between input modes (AUTO, DTS, and
ANALOG) (see page 90).
P Beam mode buttons
Change the beam mode settings (see pages 56, 62, and
63).
Q SUR. DECODE
Selects the surround mode for playback (see page 59).
R MENU
Displays the setup menu on your TV monitor (see
pages 31 and 75).
S Operation mode selector
Selects the operation mode of this unit. Select YSP when
operating this unit and select TV/AV when operating your
TV or other AV components.
T RETURN
Returns to the previous SET MENU screen.
U TV VOL +/–
Adjusts the volume level of your TV (see page 95).
V CH +/–
Changes the channels of your TV, digital satellite tuner,
cable TV tuner, or VCR (see pages 95 to 97).
W TV MUTE, CODE SET
Mutes the audio output of your TV (see page 95).
Sets up remote control codes (see page 94).
Note
The functions L and M are available only when the FM/XM
stations are preset.
Controls and functions
11
En