Yamaha RX-V3000RDS Owner's Manual page 67

ROOM SIZE
[P. ROOM SIZE
for the presence sound field
Function .............. This parameter adjusts the apparent size of the surround sound field. The larger the value, the larger the surround sound
field becomes.
Description ......... As the sound is repeatedly reflected around a room, the larger the hall is, the longer the time between the original
reflected sound and the subsequent reflections. By controlling the time between the reflected sounds, you can change
the apparent size of the virtual venue. Changing this parameter from one to two, doubles the apparent length of the
room.
Sound Source
LIVENESS
Function .............. This parameter adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the early reflections
decay.
Description ......... The early reflections of a sound source decay much faster in a room with acoustically absorbent wall surfaces than in
one which has highly reflective surfaces. A room with acoustically absorbent surfaces is referred to as "dead," while a
room with highly reflective surfaces is referred to as "live." The LIVENESS parameter lets you adjust the early
reflection decay rate, and thus the "liveness" of the room.
Sound Source
S. DELAY (Surround Delay)
Function .............. This parameter adjusts the delay between the direct sound and the first reflection in the surround sound field.
S. INIT. DLY (Surround Initial Delay)
Function .............. This parameter adjusts the delay between the direct sound and the first reflection on the surround side of the sound
field. You can only adjust this parameter when at least two front channels and two rear channels are used.
S. ROOM SIZE (Surround Room Size)
Function .............. This parameter adjusts the apparent size of the surround sound field.
]
Sound Source
Time
Small value = 0.1
Sound Source
Dead
Time
Small Reflected
Sound
Small value = 0
Control Range 0 – 49 msec (The range depends on the signal format.)
Early
Reflections
Time Time
Large value = 2.0
Live
Time Time
Large
Reflected Sound
Large value =10
DSP Parameter
Control Range 0.1 – 2.0
Control Range 0 – 10
Control Range 1 – 49 msec
Control Range 0.1 – 2.0
65