Presetting Stations - Yamaha RX-V3000RDS Owner's Manual

Natural sound av receiver
Hide thumbs Also See for RX-V3000RDS:
Table of Contents

Advertisement

Presetting Stations

MEMORY
MAN'L/AUTO FM
A-1:FM 89.0 MHz
MEMORY
MEMORY
MAN'L/AUTO FM
Automatically presetting stations
You can use the Automatic Preset Tuning feature to store FM stations. With this
function, the unit automatically tunes to FM stations with strong signals, then
stores up to 40 of those stations in order.
1 Tune to the FM station from which you want automatic presetting to begin.
1
2 Press and hold MEMORY for more than 3 seconds.
2
The preset number and the MEMORY and AUTO tuning indicators flash.
Then, after about five seconds, automatic preset tuning begins.
When Automatic Preset Tuning is complete, the display shows the frequency
of the last preset station.
MEMORY
D-TV/LD
DVD
Automatic Preset Tuning Options
CABLE
MD/TAPE
STEREO AUTO
SAT
CD-R
VCR 1
TUNER
VCR2/DVR
CD
Before Automatic Preset Tuning begins (within about five seconds), you can set
V-AUX
PHONO
the preset number from which the unit will store FM stations and the direction in
which the unit will scan for stations.
1 Press PRESET/TUNING to display the colon (:). Then turn the Multi jog knob
to select the preset station number where the first station will be stored. The unit
will stop storing stations if it reaches preset number E8.
2 Press PRESET/TUNING to turn off the colon (:). Then turn the Multi jog knob
counterclockwise to scan for lower frequency stations or clockwise to scan for
higher frequency stations. If you do not turn either direction before Automatic
Preset Tuning begins, the unit will scan for higher frequency stations.
Notes:
• You can replace a preset station with another FM or AM station manually by simply
following the procedure of the section "Manually presetting stations".
• If the number of received stations does not reach to E8, the search finishes automatically
after searching all frequencies.
• With this function, only FM stations with sufficient signal strength are stored
automatically. If the station you want to program is weak in signal strength, tune to it in
monaural mode manually, then program it by following the procedure in "Manually
presetting stations".
Manually presetting stations
This unit can store up to 40 stations (8 stations x 5 groups). Using this feature, you
can easily tune to any preset station by selecting the preset station number.
1 Tune to a station.
1
2 Press MEMORY (MAN'L/AUTO FM).
2
The MEMORY indicator flashes for about five seconds.
3 Turn the Multi jog knob clockwise or counterclockwise to select a preset
3
station number.
Note:
• You must select a preset station number before the MEMORY indicator goes off
(about five seconds).
AM/FM Tuner
31

Advertisement

Table of Contents
loading

Table of Contents