Speaker Set (1A. Center Sp To 1G. Main Level) - Yamaha RX-V3000RDS Owner's Manual

1. SPEAKER SET (1A. CENTER SP to 1G. MAIN LEVEL)

Use this feature to select suitable output modes for your speaker configuration. You must set the output mode when you use a subwoofer.
1A. CENTER SP (Center Speaker Mode)
By adding a Center speaker to your speaker configuration, this unit can provide good dialogue localization for many listeners and superior
synchronization of sound and images. The OSD shows a large, small, or no center speaker depending on how you set this item. The initial
setting is "LRG".
Select the "LRG" (Large) setting if you have a large Center speaker. The entire range of Center channel signals is sent to the Center
speaker.
Select the "SML" (Small) setting if you have a small Center speaker. Center channel low frequency signals of 90 Hz and below are
directed to the speakers selected with the 1E. LFE/BASS OUT item.
Select the "NONE" setting if you do not have a Center speaker. All of the Center channel signals are directed to the left and right
Main speakers. The "NONE" position provides good dialogue localization for the person sitting in the main listening position.
Large
1A CENTER SP
"LRG SML
1B. MAIN SP (Main Speaker Mode)
The display shows small or large Main speakers depending on how you set this item. The initial setting is "LARGE".
Select the "LARGE" setting if you have large Main speakers. The entire range of left and right Main channel signals is directed to the
left and right Main speakers.
Select the "SMALL" setting if you have small Main speakers. The Main channel low frequency signals of 90 Hz and below are
directed to the speakers selected with the 1E. LFE/BASS OUT item.
Large
1B MAIN SP
"LARGE
Note:
• When you select the "MAIN" setting for the 1E. LFE/BASS OUT item, the Main channel low frequency signals of 90 Hz and below are directed to the
Main speakers even if you select the "SMALL" setting for the Main speaker mode.
1C. REAR L/R SP (Rear Speaker Mode)
The OSD shows large, small, or no Rear speakers depending on how you set this item. The initial setting is "LRG".
Select the "LRG" setting if you have large left and right Rear speakers or if you use a Rear Subwoofer. The entire range of Rear
channel signals is sent to the left and right Rear speakers.
Select the "SML" setting if you have small left and right Rear speakers. Rear channel low frequency signals of 90 Hz and below are
directed to the speakers selected with the 1E. LFE/BASS OUT item.
Select the "NONE" setting if you do not have Rear speakers.
• In this case, the Rear Center speaker will automatically be set to "NONE" and the 1D. REAR CT SP item will be skipped.
Large
1C REAR L/R SP
"LRG SML
Small
1A CENTER SP
NONE LRG "SML
Small
1B MAIN SP
SMALL LARGE "SMALL
Small
1C REAR L/R SP
NONE LRG "SML
None
1A CENTER SP
NONE LRG SML "NONE
1B MAIN SP
"LARGE SMALL
None
1C REAR L/R SP
NONE LRG SML "NONE
SET MENU Items
1A CENTER SP
"LRG SML NONE
1C REAR L/R SP
"LRG SML NONE
39