Exchanging Preset Stations - Yamaha RX-V3000RDS Owner's Manual

AM/FM Tuner
MEMORY
MAN'L/AUTO FM
Shows the displayed station has been
programmed to A-1.
A-1:FM 89.0 MHz

Exchanging Preset Stations

PRESET
/TUNING
EDIT
PRESET
/TUNING
EDIT
Shows the exchange of stations is completed.
EDIT E1-A5
32
4 Press MEMORY (MAN'L/AUTO FM).
4
The station band and frequency appear in the display with the preset group
and number you selected.
5 Repeat steps 1 through 4 to store other stations.
5
You can store up to 40 stations (A1~A8, B1~B8, C1~C8, D1~D8, and
E1~E8).
MEMORY D-TV/LD DVD
CABLE MD/TAPE
STEREO
SAT CD-R
VCR 1 TUNER
VCR2/DVR CD
V-AUX PHONO
You can exchange the stations stored on two preset numbers. The example below
describes the procedure for exchanging the stored stations at preset numbers E1 and
A5.
1 1 Tune to the E1 preset station number.
See "Tuning to Preset Stations."
2 Press and hold PRESET/TUNING (EDIT) for more than 3 seconds.
2
E-1:FM
"E-1" flashes in the display.
3 Tune to the A5 preset station number.
3
A-5:FM
See "Tuning to Preset Stations."
A-5 flashes in the display.
4 Press PRESET/TUNING (EDIT) again.
4
The stations stored at the two preset locations are exchanged.
Notes:
• The memory back-up circuit prevents the stored data from being lost even if this
unit is set to standby mode, the power cord is disconnected from the AC outlet, or
power service is temporarily cut due to power failure. However, if the power is cut
for more than one week, the memory may be deleted.
• Any stored station data existing at a preset number is cleared when you store a new
station at that preset number.
D-TV/LD DVD
CABLE MD/TAPE
STEREO AUTO SAT CD-R
• The reception mode (stereo or monaural) is stored along with the station frequency.
VCR 1 TUNER
VCR2/DVR CD
V-AUX PHONO