Table of Contents
Advertisement
7. I/O ASSIGN
Use this feature to designate the input for the COMPONENT jacks (A and B) and DIGITAL INPUT/OUTPUT jacks (1) to (9) to any
sources you want. Change the setting when there are not enough digital input jacks depending on the source components you are using.
Initial settings are shown on the display.
7A. For the
COMPONENT
VIDEO INPUT jacks
[A] and [B]
7A CMPNT-V INPUT
≥ [A]............
DVD
[B]............D-TV/LD
7A CMPNT-V INPT
[A]............
DVD
8. INPUT MODE
8 INPUT MODE
>AUTO
LAST
8 INPUT MODE
9. PARAMETER INI (Parameter Initialization)
9 PARAM. INI
9 PARAM. INI
*1
2
3
4
9 PARAM. INI
5
6
7
8
9
10
11
12
9 PARAM. INI
7B. For the
OPTICAL OUTPUT
jacks (1) and (2)
7B OPTICAL OUT
≥ (1)............MD/TAPE
(2)............
CD-R
7B OPTICAL OUT
(1)............MD/TAPE
Use this feature to designate the input mode for sources connected to DIGITAL
INPUT jacks when you turn on this unit.
"AUTO
LAST
Use this feature to initialize the parameters for each DSP program within a DSP
program group. When you initialize a DSP program group, all of the parameter values
*1
2
3
4
within that group revert to their initial settings.
5
6
7
8
9
10
11
12
7C. For the
OPTICAL INPUT
jacks (3) to (7)
7C OPTICAL IN
(3)............
CD
(4)............
CD-R
≥
(5)............
DVD
(6)............D-TV/LD
(7)............
SAT
7C OPTICAL IN
(5)............
DVD
Select "AUTO" to allow this unit to automatically detect the type of input
signal and select the appropriate input mode.
Select "LAST" to set this unit to automatically select the last input mode used
for that source.
Press the DSP program group button on the remote control for the DSP
program you want to initialize.
• All of the DSP programs within the selected program group are initialized.
Repeat this step to initialize other DSP program groups.
Notes:
• The asterisk (*) mark next to a DSP program group number indicates that you have
changed the parameter values in one or more DSP programs within that group.
• The parameter values of the DSP programs do not change if you initialize a
program group that does not have the asterisk (*) mark.
• When the MEMORY GUARD function is set to "ON", you cannot initialize any
program groups.
• You cannot initialize the individual DSP programs within a group separately.
Caution:
• Once you initialize a DSP program group, you cannot have this unit revert the
parameter values back to the previous settings automatically.
SET MENU Items
7D. For the
COAXIAL INPUT
jacks (8) to (9)
7D COAXIAL IN
(8)............
CD
≥
(9)............ CABLE
7D COAXIAL IN
(9)............ CABLE
43
Advertisement
Chapters
Table of Contents
