ACM 150
Figure 60. Alarm simulation
•
Select the point you want to simulate alarms on and hit Next.
•
Select the gases for simulating alarms and hit Next.
•
On the next screen click either Go to activate the alarms or Cancel to abort.
A summary listing all simulated alarms is displayed, see
Figure 61. Simulated alarms summary
•
Click Reset Alarms to reset the gas concentrations sent via Modbus/TCP to "0.0"
or click Back to choose another point to simulate alarms on. You may reset all
simulated alarms from the Alarm Sim. main screen anytime later on.
Figure
61:
97