Table of Contents
Advertisement
ACM 150
Time / date
Set the time, using a 24 hour clock.
Figure 55. Setting time and date
Access codes
Access codes should be assigned only to personnel authorized to make changes to
the setup program and to trained technicians who perform services and diagnostics.
Select Login, which prompts you to enter a code number.
A Master Code is created by Honywell Analytics in the configuration software and
given to the person in charge of the ACM 150 monitor. That code must be entered
when Access Login is selected to pull up the setup menu as shown below. The
Master Code may be changed by the user and that code may be used for multiple
monitors in the same facility.
When assigning a code set, enter the name of the employee or group assigned to
that code set. Passwords require a length of at least 8 digits and must contain at
least
•
one lower case character
•
one numeric character
•
one of the following special characters: ! = - * > <
To further grant or deny access to different screens of the user interface, access
levels are assigned to various screens and to all users. In order to access a page and
change configuration settings, the logged-in user needs an access level equal to or
higher than the one assigned to the specific screen. Only the Administrator using the
Mastercode may change the Access Level on the screen "Access Codes...".
92
Hide quick links:
Advertisement
Table of Contents
