Trigger Control; Trigger Out - Denon HEOS Link HS2 Owner's Manual

Contents
o Trigger Control
If the power amplifier connected to this unit has a trigger input
connector, connect it to the TRIGGER OUT jack of this unit using a
3.5mm cable (not included). A signal up to 12 V/150 mA is output from
the TRIGGER OUT jack.
Power amplifier
DC12V
150mA
MAX.
IR TRIGGER
OUT OUT
AC IN
PRE OUT
NOTE
0 Use a monaural mini-plug cable for connecting the TRIGGER OUT jacks. Do not
use a stereo mini-plug cable.
Setup Use
TRIGGER IN
5V1A
COAXIAL OPTICAL OPTICAL
USB NETWORK
OUT OUT IN
SUB
WOOFER LINE IN AUX IN
Troubleshooting
o Trigger out
Select Trigger Control when you are connecting your HEOS to a power
amp that supports +12 V trigger input.
The HEOS app can control the power on and off for the amp.
1
Select Trigger.
2
Select Done.
NOTE
0 You can test the connection to the amp by pressing the power on, off in setting
screen for the amp.
44
Status LED Appendix