Contents
Power management
Power modes
o Quick Start Mode
HEOS device automatically enters "Quick Start Mode" to save power
in the following cases. This unit will automatically resume to full power
whenever the device is selected and playing music.
The status LED dims when the mode is switched to Quick Start Mode.
Ethernet
n
After around 20 minutes of no operation and no network access after
playing music via Ethernet.
Wi-Fi
n
After around 20 minutes of no operation and no network access after
playing music via Wi-Fi.
USB
n
After around 20 minutes of no operation and no network access after
playing music from a USB memory device.
Bluetooth
n
After the Bluetooth connection is disconnected and there is around 20
minutes of no operation and no network access after playing music via
Bluetooth.
Setup
Use
Troubleshooting
AUX IN
n
After around 20 minutes of no operation after AUX cable is
disconnected.
OPT IN
n
After around 20 minutes of no operation after optical device playback
is stopped in the HEOS app.
48
Status LED
Appendix