Deep Standby - Denon HEOS Link HS2 Owner's Manual

Contents
o Deep Standby
The device also has the ability to automatically enter "Deep Standby"
whenever the wired or wireless network connection is removed for
more than 60 minutes in "Quick Start Mode". The front panel LED will
turn off during Deep Standby.
To "wake" a HEOS device from Deep Standby, you must press the
volume or mute buttons which will immediately turn on the front panel
LED.
0 You also push the mute button for 3 seconds, the device enters the Deep
Standby.
o Off
To completely turn off the power to the device you must remove the
mains plug from the power outlet.
Setup Use Troubleshooting
49
Status LED Appendix