Remote Control Unit - Denon AVC-X3700H Owner's Manual

Contents
Remote lock function
When connecting an IR receiver, enable the Remote lock function. When
the function is enabled, you can not perform operations with the remote
control unit.
By default, this function is disabled.
X
PURE DIRECT
SOUND MODE
Front panel
Downloaded from ManualsNet.com
Connections Playback
STATUS
ZONE2 SOURCE
Display Rear panel
search engine
Settings
Disabling the sensor function of the

remote control unit

1
Press X while you press and hold SOUND MODE and
ZONE2 SOURCE with the unit in standby mode.
2
Use SOUND MODE or PURE DIRECT to select "RC
LOCK On".
3
Press STATUS to enter the setting.
The infrared light receiving function is disabled.
Enabling the remote sensor function
1
Press X while you press and hold SOUND MODE and
ZONE2 SOURCE with the unit in standby mode.
2
Press SOUND MODE or PURE DIRECT to select "RC
LOCK zOff".
(z The currently set mode.)
3
Press STATUS to enter the setting.
Infrared light receiving function on the main unit is enabled.
147
Remote
Tips Appendix
Index