Concluding Work - Siemens FC700A Maintenance Instructions Manual

Concluding work

10 Concluding work
18
Siemens Building Technologies
Fire & Security Products
Alarm test
Carry out an alarm test with remote transmission in the presence of the customer /
system operator.
Training
Provide follow-up training.
System logbook
Check the system log book if it is complete and updated.
System disk
If changes have been made to the control unit configuration, update the system
disk and send a copy to the project-engineering department.
Customer data
Check the customer data sheet (telephone no of contact person, etc.).
Spare parts
Refurbish spare parts like fuses, detectors, etc.
Deactivations, zone isolations
Restore all systems or parts of systems to their active status.
Confirmation
Have the customer / system operator sign the service report?
007833_a_en_--.doc
03.2004