Test And Measuring Equipment - Siemens FC700A Maintenance Instructions Manual

Test and measuring equipment

3 Test and measuring equipment
10
Siemens Building Technologies
Fire & Security Products
Multimeter
Accuracy ≤ 2%
Internal resistance ≥ 20kΩ
Measuring ranges 1 to 500VAC / DC, 100mA to 5ADC, 10Ω to10MΩ
Battery test set
Load resistor 5Ω
Maintenance-PC
System requirements see document 007895
Detector tester
Depending on detector type / detector system
For all detectors OP620, OH620 and HI62x
Detector exchanger DZ1191
–
Detector exchanger and tester DZ1193
–
For smoke detectors OP... and OH...
Detector tester RE6 and test gas
–
For heat detectors HI...
Detector tester RE6T
–
For smoke detectors DLO1191
Detector tester RE10
–
Adjustment set DZL1191
–
For flame detectors DF1191/92
Test lamp LE3, StabexHF for explosion hazard areas
–
Line tester
Depending on detector type
For collective detector lines
Alarm test probe (5.6V Zener diode with 220Ω resistor)
–
For addressable detector lines
Line test unit DZ1131
–
007833_a_en_--.doc
03.2004