Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Bosch GLM 20 Original Instructions Manual

1.

Symbols used

1.1

In the documentation

1.1.1 Warning notices -
Structure and meaning
Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
Warning KEY WORD – Nature and source of hazard!
symbol
Consequences of hazard in the event of fail-
ure to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-obser-
vance:
Key word Probability of
occurrence
DANGER Immediate impend-
ing danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2

Symbols in this documentation

Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible inter-

result mediate result.
Final result There is a visible final result on com-
"
pletion of the instruction.
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible.
Robert Bosch GmbH
Severity of danger if in-
structions not observed
Death or severe injury
Death or severe injury
Minor injury
Symbols used | GLM 20 | 13
2.

Safety Notes

All instructions must be read and observed
in order to work safely with the measur-
ing tool. The integrated protections in the
measuring tool may be compromised if the
measuring tool is not used in accordance
with the instructions provided. Never make
warning signs on the measuring tool unrec-
ognisable. STORE THESE INSTRUCTIONS IN
A SAFE PLACE AND INCLUDE THEM WITH
THE MEASURING TOOL WHEN GIVING IT TO
A THIRD PARTY.
¶
Caution – The use of other operating or
adjusting equipment or the application
of other processing methods than those
mentioned here can lead to dangerous
radiation exposure.
The measuring tool is provided with a warning label
(marked with number 6 in the representation of the
measuring tool on the graphics page).
14
¶
If the text of the warning label is not in your national
language, stick the provided warning label in your
national language over it before operating for the
first time.
Do not direct the laser beam at persons or
animals and do not stare into the direct or
reflected laser beam yourself, not even from
a distance. You could blind somebody, cause
accidents or damage your eyes.
en
|
1 689 989 376 2018-04-01