Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Bosch BEA 750 Original Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 19
en
20 | BEA 750 | Symbols used
1.

Symbols used

1.1

In the documentation

1.1.1
Warning notices -
Structure and meaning
Warning notices warn of dangers to the user or
people in the vicinity. Warning notices also indicate
the consequences of the hazard as well as preventive
action. Warning notices have the following structure:
Warning
symbol
KEY WORD – Nature and source of hazard!
Consequences of hazard in the event of
failure to observe action and information
given.
Hazard prevention action and information.
The key word indicates the likelihood of occurrence
and the severity of the hazard in the event of non-
observance:
Key word
Probability of
occurrence
DANGER
Immediate impending
danger
WARNING
Possible impending
danger
CAUTION
Possible dangerous
situation
1.1.2

Symbols in this documentation

Symbol Designation
Explanation
Attention
Warns about possible property damage.
!
Information
Practical hints and other
i
useful information.
1.
Multi-step
Instruction consisting of several steps.
2.
operation
One-step
Instruction consisting of one step.
e
operation
Intermediate
An instruction produces a visible
result
intermediate result.
Final result
There is a visible final result on
"
completion of the instruction.
|
1 689 989 339
2017-12-12
Severity of danger if
instructions not observed
Death or severe injury
Death or severe injury
Minor injury
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible.
DANGER – Exposure of live parts on
opening the BEA 750!
Risk of (fatal) injury or heart failure
from electric shocks on contact with live
components (e.g. master switch, printed
circuit boards).
Work on electrical installations or
equipment is only to be performed by
qualified electricians or trained personnel
under the guidance and supervision of an
electrician.
Disconnect the BEA 750 from the mains
before opening.
Disposal
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
2.
Standards, directives and
approvals
2.1
Approvals
The BEA 750, in combination with BEA 065 and
BEA 070, is approved in Germany for conducting
emission tests on vehicles with spark ignition engines
(gasoline engines) and compression ignition engines
(diesel engines).
i
The test sequences comply with the "Guideline for
evaluating operator control of emission measuring
instruments" dated 2014.11.04. The BEA 750 is
subject to mandatory calibration of exhaust gas
analyzers and must be calibrated yearly.
2.2

RED (Radio Equipment Directive)

Robert Bosch GmbH hereby declares that (the radio
equipment type) BEA 750 conforms to the directive
2014/53/EU. The complete text of the EU declaration of
conformity is available from the following web address:
http://www.downloads.bosch-automotive.com
i
In non-European countries, the corresponding
national regulations on the operation of wireless
devices in the 2.4 GHz and 5 GHz frequency band
must be heeded (e.g. WLAN or Bluetooth).
Robert Bosch GmbH

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bea 065

Table of Contents