List Of Divertible/Not Divertible Data (Sv13/Sv22) - Mitsubishi Electric MELSEC iQ-R Series Migration Manual

2. DETAILS OF MIGRATION FROM Q17nCPUN(-T) TO RnMTCPU

2.4.2 List of divertible/not divertible data (SV13/SV22)

Q17nCPUN(-T) data name
System settings
Basic settings
Base setting
Multiple CPU setting
System basic setting
SSCNET setting
System configuration
SSCNET configuration
High-speed read data
Servo data settings
Servo data
Servo parameter
Parameter block
Limit output data
Motion SFC programs
Motion SFC parameter
Motion SFC program
Servo programs
K mode allocation
Servo program
Mechanical system program
Cam data (converted data)
Device memory
Backup data
Communication setting
(Note-1): MELSOFT MT Developer2 reads parameters set in MELSOFT GX Works3.
(Note-2): When the system parameters have been set already, only the auto refresh settings for
(Note-3): Select SSCNETIII or SSCNETIII/H at SSCNET setting.
(Note-4): The servo amplifiers are replaced with MR-J4-B.
(Note-5): Review the fixed parameters according to the resolution per servo motor revolution.
(Note-6): Refer to "MELSOFT MT Developer2 Help" for conversion rules for servo parameters.
(Note-7): When Motion registers (Monitor devices) are used in the program, they need to be changed.
(Note-8): Refer to section 2.4.4 for replacement of mechanical system programs and cam data.
Therefore, the existing data which have been set in MELSOFT MT Developer2 for
Q17nCPUN(-T) cannot be diverted.
Q17nCPUN(-T) can be diverted ([R Series Common Parameter] - [Multiple CPU Setting] -
[Refresh (END) Setting])
(Number of pulses per revolution and movement amount per revolution)
Divertible/not divertible
△
△
○
△
△
○
○
○
○
○
○
○
○
○
○
○
○
○
×
×
○
: Divertible, △: Partially divertible,
2 - 30
Remarks
(Note-1)
(Note-1), (Note-2)
(Note-3)
(Note-1)
(Note-4)
(Note-5)
(Note-6)
(Note-7)
SV22 only
SV22 only (Note-8)
SV22 only (Note-8)
×
: Not divertible