Texas Instruments TIDA-050026-23882 Design Manual

Texas Instruments TIDA-050026-23882 Design Manual

24-port (2 pair) power sourcing equipment reference design for multi-port applications

Advertisement

Quick Links

Design Guide: TIDA-050026-23882
24-Port (2 pair) Power Sourcing Equipment Reference
Design for Multi-port Applications
Description
This reference design features an evaluation module
for the 24-port (2 pair) PSE system which contains a
hardware kit, a system firmware image, and a system
firmware GUI. The hardware kit consists of a mother
board (PSEMTHR24EVM-081), an MSP430 daughter
card (PSEMCUDAUEVM-082), and a PSE daughter
card (TPS23882EVM-084). To evaluate the system
(both hardware and software), USB2ANY and MSP-
FET adapters are also needed.
The MSP430F5234 on PSEMCUDAUEVM-082 has
been programmed with pre-production firmware for
EVM testing purposes. Please follow the instructions in
this user's guide to flash the latest firmware from
TI.com
before evaluation.
Resources
Design Folder
TIDA-050026-23882
TPS23882EVM-084
Tool Folder
PSEMTHR24EVM-081
Tool Folder
PSEMCUDAUEVM-082
Tool Folder
TPS23882
Product Folder
MSP430F5234
Product Folder
CSD19538Q3A
Product Folder
Search Our E2E™ support forums
An IMPORTANT NOTICE at the end of this TI reference design addresses authorized use, intellectual property matters and other
important disclaimers and information.
TIDA032 – October 2019
Submit Documentation Feedback
Power
Power
Supply 1
Supply 2
USB2ANY Connector
PG1
PG2
Sensing
Edge
Connector
_Power
I2C Repeater
Edge
(Optional)
PSE Control Signals
Connector
_signal
Isolation
54 V to
PSE Daughter Card
PSE_3.3 V
Buck
PSE Ports
24-Port RJ45 Connectors
24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port
Copyright © 2019, Texas Instruments Incorporated
Features
Onboard power monitoring
24 (2 pair) port system, and expandable to 48 port
system
Highly flexible system with configurable GUI and
selectable host interface (I
Multiport power management
Multiple power supplies
Supports legacy powered devices (PDs)
Applications
Campus and branch switches
Video recorder
Edge router
54-V bus
PSE I2C bus
MSP430
Daughter Card
54 V to
GPIOs
ISO_3.3 V
MSP430
Isolated
DC/DC
I2C
UART SPI
GPIOs
JTAG
USB2ANY Connector
14 pin
2
C or UART)
PSE System Motherboard
Edge
Connector
_Power
Edge
Connector
_signal
Applications
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TIDA-050026-23882 and is the answer not in the manual?

Questions and answers

Summary of Contents for Texas Instruments TIDA-050026-23882

  • Page 1 An IMPORTANT NOTICE at the end of this TI reference design addresses authorized use, intellectual property matters and other important disclaimers and information. TIDA032 – October 2019 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 2: System Description

    EVM testing purposes. Please follow the instructions in this user's guide to flash the latest firmware from TIDA-050026-23882 folder PSEMCUDAUEVM-082 tool folder before evaluation. 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port TIDA032 – October 2019 Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 3: System Overview

    System Overview www.ti.com System Overview Block Diagram Figure 1. TIDA-050026-23882 Block Diagram PSE System Motherboard Power Power Supply 1 Supply 2 USB2ANY Connector Sensing Edge Edge Connector Connector 54-V bus _Power _Power PSE I2C bus I2C Repeater Edge (Optional) Edge...
  • Page 4 If in normal operation mode, output low. P6.2 Guard-band indication Need an external LED 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port TIDA032 – October 2019 Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 5 PSE designs and enables interchangeable 2-layer PCB designs to accommodate different system PoE power configurations. TIDA032 – October 2019 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 6 This 100-V, 49-mΩ, SON 3.3-mm × 3.3-mm NexFET™ power MOSFET is designed to minimize conduction losses and reduce the board footprint in PoE applications. 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port TIDA032 – October 2019 Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 7 10-mV full- scale. TIDA032 – October 2019 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 8: Required Hardware And Software

    FirmPSE GUI (request access to the GUI through the TIDA-050026-23882 folder or the PSEMCUDAUEVM-082 tool folder) 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port TIDA032 – October 2019 Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 9 NOTE: A 30-pin ribbon cable is required to enable the full features of PSE system firmware GUI. TIDA032 – October 2019 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 10 C clock signal to PSE TP17 PSE_SDAI C data to PSE TP18 PSE_SDAO C data from PSE 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port TIDA032 – October 2019 Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 11 J12, J13, J14 USB2ANY connector (30 pin) J17, J18 For MSP430 daughter card mechanical mouting purpose TIDA032 – October 2019 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 12 (access from TIDA-050026-23882 folder PSEMCUDAUEVM-082 tool folder). When finished, click Proceed to go to the configuration page. 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port TIDA032 – October 2019 Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 13 The OSS function of the PSE is used to fast shutdown the low priority ports. There are 2 sources to generate the OSS signal: TIDA032 – October 2019 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 14 Total number of power supplies and the power budget of each power supply. If there's only one power supply, the power good signal must be connected to P1.5. 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port TIDA032 – October 2019 Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 15 The Port Configuration is applied to the port by port settings, such as port PoE enable and disable, port priority, and port power limit (only in port limit mode). TIDA032 – October 2019 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 16 When configurations are reviewed, the GUI can generate the default code image and program the device directly through MSP-FET. 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port TIDA032 – October 2019 Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 17 PC and the GUI will be in online mode after selecting host interface protocol. Figure 10. Host Interface Protocol Selection in Online Mode TIDA032 – October 2019 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 18 C or UART port as the normal communication. This is beneficial to firmware upgrade after the product is released to customers. 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port TIDA032 – October 2019 Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 19 Download Uniflash from ti.com and use it to flash the BSL code by following the steps: Select MCU device to MSP430F5234. TIDA032 – October 2019 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 20 Figure 13. MCU Device Selection Page Configure the flash section. Figure 14. Configure Settings and Utilities Page 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port TIDA032 – October 2019 Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 21 PSE device's registers by providing I C address and register number. The password is "C430". TIDA032 – October 2019 24-Port (2 pair) Power Sourcing Equipment Reference Design for Multi-port Applications Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
  • Page 22: Design Files

    To download the schematics, see the design files at TIDA-050026-23882. Bill of Materials To download the bill of materials (BOM), see the design files at TIDA-050026-23882. PCB Layout Recommendations KSENSA is shared between SEN1 and SEN2, KSENSB is shared between SEN3 and SEN4, KSENSEC is shared between SEN5 and SEN6, KSENSED is shared between SEN7 and SEN8.
  • Page 23: Assembly Drawings

    Design Files www.ti.com Gerber Files To download the Gerber files, see the design files at TIDA-050026-23882. Assembly Drawings To download the assembly drawings, see the design files at TIDA-050026-23882. Software Files To download the software files, see the design files at TIDA-050026-23882.
  • Page 24 TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2019, Texas Instruments Incorporated...

Table of Contents