Assembly With Valve - Baelz Automatic 373-E66 Series Operating Instructions Manual

Operating Instructions

4.2 Assembly with valve

Prior to assembly check that
● the specifications of the linear actuator comply with the operating conditions.
● the valve is complete (yoke on actuator or on valve).
● the connections on valve and actuator match.
Figure 6: Assembly with valve
It must be ensured that the connecting rod of the actuator and the valve spindle are correctly aligned. A misalign-
ment will lead to power loss or premature wear.
When supplied with integrated switching and signalling unit, the stroke may have to be adjusted.
Technical specifications subject to change
W. Bälz & Sohn GmbH & Co.
Phone +49 (0)7131 15 00 0
Koepffstrasse 5
Fax +49 (0)7131 15 00 21
BA 373-E66
Observe copyright protection DIN 34
74076 Heilbronn
www.baelz.de mail@baelz.de
Page 10/37
Germany