2.1.2 Mechanism for Updating RU-AP and RU-Config
I How to Write the Flash ROM of the RU
The RU itself is not equipped with any input device that allows for directly overwriting the RU-
AP or RU-Config into the flash ROM of the RU. Thus, in order to overwrite the flash ROM of
the RU, a personal computer (PC) connected to the network should be used.
Basically, for CL-RU connection, the CL-PC should be employed.
REFERENCE
For data communication between the RU and CL, the FTP server (one of network protocols
for exchanging files between terminals) is used.
[1] Difference between update mechanisms depending on the PC-MUTL software
version
The mechanism for overwriting the flash ROM of the RU from the FTP server running on the
CL differs depending on the PC-MUTL software version.
REFERENCE
To make the RU operative, not only the RU-AP and RU-Config must be contained in the flash
ROM of the RU, but also the RU-AP and RU-Config of the identical contents must always
reside in the flash ROM of the FTP server.
010-051-05
02.20.2002 FM3328
CR-IR346RU Service Manual
MD - 19
MD - 19