Advertisement
Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take
care of the following hints on installation and use to avoid technical damages. Any failure
caused by ignoring the mentioned items and cautions mentioned in the operation and in-
stallation instructions are not covered by our warranty and any liability.
Item number
Operation frequency
IP protection class
Thank you for choosing our PINPOINTER.The PINPOINTER is designed for determines the
position of the metal object precisely; It should be cooperated with the search coil metal
detector. When the metal detector finds buried metal objects it can only determines the
roughly position and you must dig a large hole. In addition, small metal objects are often
oxidized seriously and combined with the sediment. It's difficult to distinguish. At this mo-
ment, the pinpointer will help you to find treasures and metal objects more easily.
The pinpointer adopts the advanced one-button design and it doest need to adjust when
you use. It's very simple and suitable for all kinds of complex environment include not
only the situation that the soil is mineralized seriously but also the sand that is saturated
with salt water. The mining environment is often complex and a lot of interferences will
affect the positioning accuracy. The pinpointer will balance interferences in the surround-
ing environment automatically when it starts and improve the positioning accuracy .In the
process of using when the environment is changed or the pinpointer is influenced by the
magnetic field, and when the sensitivity is dropped in the electromagnetic field or when
the unit is excited automatically. It's only to press the balance button to enter a new bal-
ance for maintains the effective detection sensitivity.
The pinpointer has two kinds of alarm signals which are vibration and LED to indicate the
existence of metal objects. When the front of the probe rod approaches the metal object,
the unit will vibrate and at the same time the LED will glow in the order of red, green,
blue and white light. It will glow red light at first. The pinpointer approaches metal objects
more nearby the vibration frequency will be higher. White light will glow when the distance
is nearest.
The white illumination LED in front of the pinpointer can provides illumination in the situ-
ation that is the dark and underwater and help to look for metal objects.
The pinpointer is waterproof; It can works under the water depth is not more than 10
meters.
The pinpointer uses a 9V alkaline battery. When the voltage is low the LED will flash all at
once and send a signal to change the battery.
The pinpointer also is an effective tool for DIY in the home. You can search for and locate
metal pipes, wires, reinforced concrete, and control boxes in small spaces such as walls
Technische Daten
10031375
ca. 12 kHz
IP68
Introduction
13
Advertisement
