Clean Up - MAGIC FX PSYCO2JET User And Installation Manual

3.9

CLEAN UP

1. Make sure the safety address is not activated (FX LED indicator on each
machine is dimmed).
2. Close the CO
Close all CO
3. Activate the Safety address again. The FX LED indicator on each connected
machine lights up.
4. Activate the Start address for CO
system.
5. Deactivate all operational addresses.
6. Deactivate the Safety address.
7. Disconnect the CO
34 MAGICFX PSYCO2JET — User and Installation Manual
®
cylinder. In case of multiple machines, connected in series:
2
cylinders.
2
hose from the CO
2
output to release the pressure from the
2
quick connector on the machine.
2