Blast Safely; General Safety Rules - MAGIC FX PSYCO2JET User And Installation Manual

2

BLAST SAFELY!

The MAGICFX PSYCO2JET has been designed and constructed in such a manner
®
that it can be used safely. This applies to the use, the circumstances and the
regulations as described in this documentation. Reading this documentation and
following the instructions are therefore necessary for everyone who is authorised to
work with the MAGICFX
The MAGICFX PSYCO2JET must be used in surroundings that:
®
• Have a stable temperature of between -10 and 50°C.
• Have a relative humidity degree between 20% and 90% (non condensing).
• Are free of dust, corrosive gases and high concentrations of organic vapours.
• Are not situated in the vicinity of a source of vibration.
2.1

GENERAL SAFETY RULES

• Only authorised persons may carry out work with the MAGICFX
• Do not use the MAGICFX
direct output.
• Make sure that children, unauthorised people and animals do not obtain
access to the MAGICFX
• Make sure there are no freestanding objects or objects that can be damaged
by the MAGICFX
• Do not use the MAGICFX
Pack.
• Do not connect more units to a single electrical circuit than the installed fuse
is able to handle. (Calculate the summed load with the electrical data from
Chapter 1)
• Do not remove any safeguards, safety caps and safety symbols.
• All required safety devices must be in good condition and function properly.
• Ensure sufficient lighting of the surroundings.
• Keep the workplace clean.
2.2 CO
2
The MAGICFX PSYCO2JET uses liquid CO
®
serious risks. Make sure that you are well informed on these risks before installation
and/or operation. Always use approved CO
Always consult your CO
and use.
MAGIC FX is not liable for unsafe situations, accidents and damage that are the result
of incorrect working with CO
16 MAGICFX PSYCO2JET — User and Installation Manual
®
PSYCO2JET.
®
PSYCO2JET if there are people or animals in the
®
PSYCO2JET.
®
PSYCO2JET within the output distance.
®
PSYCO2JET without a Controller, Dimmer or DMX
®
2
supplier for regulations and instructions on safe installation
2
and CO cylinders.
2 2
as input. The application of CO
cylinders, hoses and connections.
2
PSYCO2JET.
®
involves
2