Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MAGIC FX Snowbox SNOW FX
Summary of Contents for MAGIC FX Snowbox SNOW FX
- Page 1 USER AND INSTALLATION MANUAL ENGLISH SNOWBOX. ® PART02015 SNOW FX rev 01-00...
-
Page 2: Disclaimer
LIABILITY MAGIC FX accepts no liability for claims from third parties arising from unauthorised use, use other than that stated in this manual, and use other than in accordance with the General Conditions registered at the Chamber of Commerce. -
Page 3: Table Of Contents
TABLE OF CONTENTS Disclaimer Trademarks Liability Foreword Language Revision table Meet the MAGICFX SNOWBOX! ® Main parts Technical data 1.3 Product identification Accessories 1.5 FX fluids Snow safely! General safety rules Indoor use Rigging Noise level Safety symbols Precautions for operation Let’s snow! Install the machine. -
Page 4: Foreword
FOREWORD Congratulations! You have bought a great new product from MAGIC FX. This manual contains all information required for the intended use of the equipment. Deviation from the described intended use can result in a hazardous situation and/or property damage. -
Page 5: Meet The Magicfx ® Snowbox
MEET THE MAGICFX SNOWBOX! ® The MAGICFX SNOWBOX is a special effects machine that creates a simulated snow ® effect. The machine launches snow into the air up to 5 meters! The machine pumps snow fluid from a can to the snow head. The snow fluid leaves the snow head through a cone formed mesh. -
Page 6: Main Parts
MAIN PARTS QUICK CONNECTOR ANGLE ADJUSTMENT KNOB OUTPUT NOZZLE ROTATION BRACKET SAFETY EYE POWER INPUT & OUTPUT (220-250Vac) INLET GRILL MAGICFX SNOWBOX — User and Installation Manual ®... -
Page 7: Technical Data
TECHNICAL DATA Product Product Name MAGICFX SNOWBOX ® Product Code MFX1705 Product Type SNOW FX Main Length 395 mm 15.5 in Dimensions Width 303 mm 11.9 in Height 220 mm 8.7 in Weight Weight 10 kg 22.05 lb Environment Minimum Temperature 0 °C 32 °F Maximum Temperature... -
Page 8: Accessories
SNOWCASE - SNOW FLUID to create the ® ® snow effect. The fluid is delivered in a can. Do not use other fluids than those that are approved and supplied by MAGIC FX, see following table. Code Type of fluid Volume MFX1303... -
Page 9: Snow Safely
SNOW SAFELY! The MAGICFX SNOWCASE has been designed and constructed in such a manner ® that it can be used safely. This applies to the use, the circumstances and the regulations as described in this documentation. Reading this documentation and following the instructions are therefore necessary for everyone who is authorised to work with the MAGICFX SNOWBOX. -
Page 10: Noise Level
NOISE LEVEL The measured maximum noise level of the product is 81 dB(A) at 1 m distance away. This level of noise is only reached during the short instances that the output is active. Please follow the European and national guidelines regarding hearing protection. SAFETY SYMBOLS Symbol Meaning... - Page 11 Do not use other fluids than those that are approved and NOTICE supplied by MAGIC FX, see Section 1.5. Always create a safety zone of 3 m in front of the MAGICFX® WARNING SNOWBOX when the snow comes directly from the snow output.
-
Page 12: Let's Snow
LET’S SNOW! INSTALL THE MACHINE. Install the MAGICFX SNOWBOX on a firm surface with the suplied bracket the ® MAGICFX SNOWBOX can be placed under an angle. ® Mount the bracket using the supplied bolts and spacers. Place the MAGICFX SNOWBOX under an angle by rotating the bracket to the bottom side of the machine and tighten the starknobs on both sides. -
Page 13: Mount Below A Truss
MOUNT BELOW A TRUSS. Use a MAGICFX BASEPLATE II for mounting on top of an upright ® NOTICE truss, see the User and Installation manual of the MAGICFX ® BASEPLATE II (PART01575). Mount the bracket on top of the machine and screw a twenty clamp (MFX3103) on the bracket with an M10 bolt, spring washer and lock nut.. -
Page 14: Mount On A Truss
MOUNT ON A TRUSS. Screw two half couplers into the threaded holes on the bottom of the machine. (product code MFX3106) and place in the desired direction. MAGICFX SNOWBOX — User and Installation Manual ®... - Page 15 Mount the half coupler on a truss and secure with a certified safety cable. MAGICFX SNOWBOX — User and Installation Manual ®...
-
Page 16: Connect Power
CONNECT POWER. Make sure that the power output on the controller or power switch is disabled. Connect a powerCON TRUE1 power cable to the power input. PowerCon TRUE1 female POWER POWER IN Connect the other end of the powerCON TRUE1 cable to the controller or power switch. -
Page 17: Re)Place The Can With Snow Fluid
(RE)PLACE THE CAN WITH SNOW FLUID. Always follow the instructions as noted on the cans. WARNING Place a can with snow fluid in the cabinet and remove the original lid. Connect the snow lid with hose and quick connector on the can, and connect the hose with the quick connector on the lid. MAGICFX SNOWBOX —... -
Page 18: Time To Snow!
TIME TO SNOW! Make sure that the direct output is free from persons and objects. When it’s time to snow, switch the power on. Enjoy the snow! To deactivate the effect, switch off the power. MAGICFX SNOWBOX — User and Installation Manual ®... -
Page 19: Clean Up
CLEAN UP Place an can filled with water in the cabinet and switch the power on to clean the nozzle and fluid hoses. Do this for about one minute. Disconnect the powercables, place the protection cap on the True1 connector on the machine. -
Page 20: Maintenance
Do not replace parts yourself; always consult MAGIC FX. DANGER TROUBLESHOOTING Always contact MAGIC FX if any malfunctions or errors occur that cannot be solved with the instructions as described in this manual. MAGICFX SNOWBOX — User and Installation Manual... -
Page 21: Correct Disposal
CORRECT DISPOSAL This symbol on the product and / or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product to designated collection points where it will be accepted free of charge. Alternatively, in some countries you may be able to return your products to your local retailer upon purchase of an equivalent new product. -
Page 22: Ec Declaration Of Conformity
EC DECLARATION OF CONFORMITY DECLARAT ION OF CONFORMIT Y According to Annex III A Machinery Directive 2006/42/EC MAGIC FX B.V. declares as manufacturer and composer of the technical construction file that the product with the following specifications: Name machine : SNOWBOX®... - Page 23 MAGICFX SNOWBOX — User and Installation Manual ®...
- Page 24 WWW.MAGICFX.EU...