Yamaha CC-70W Owner's Manual page 45

HOW TO USE THE BUILT-IN TIMER
POWER
DISPLAY
TUNER DIRECT
1 2
1 2
6 7
6 7
A B
TIME PROG
SEARCH
SKIP
DISC SKIP RANDOM REPEAT
PRESET
DOWN UP
PLAY STOP
REC/PAUSE
POWER POWER SLEEP
SLEEP
Receiver
AUTO MEMO
3 4 5
3 4 5
8
8 9 0
C D E
+
TAPE EDIT I0
STOP PLAY/PAUSE
CD
A/B/C/D/E
TUNER
PLAY
TAPE
DECK PHONO/AUX
A/B
DISPLAY VOLUME
+
-
Sleep timer operation
This unit can be turned off automatically.
1
Play the desired sound source.
2
Press the SLEEP button. "SLEEP" appears on the display,
and soon it is replaced by "120".
3
Press the SLEEP button repeatedly until the desired sleep
time appears in the display. The display will change as
described below. (Time is displayed by the minute.)
120
(Sleep timer is off.)
* The original display mode will resume about 4 seconds
after the selection is made.
* The SLEEP indicator illuminates to indicate that the
sleep timer is on.
4
The unit will turn off automatically when the preset sleep
time has passed.
To confirm the sleep time setting
Press the SLEEP button once. "SLEEP" appears on the
display, and soon it is replaced by the remaining time of the
preset sleep time.
To change the sleep time
While the SLEEP indicator illuminates, press the SLEEP
button repeatedly until the desired time appears.
To stop the sleep timer operation
Press the POWER switch, or press the SLEEP button
repeatedly until "OFF SLEEP" appears on the display.
(The SLEEP indicator will go out.)
To set the sleep time using front panel buttons
First press the DISPLAY button to display the current time.
Within 7 seconds, press the AUTO MEMO button. Whenever
the AUTO MEMO button is pressed, the sleep time changes.
Using the timer and the sleep
timer at the same time
1
Prepare timer playback. (See pages 40 and 41.)
* Do not turn the power of this unit off after the timer
setting is finished.
2
Press the SLEEP button and set the sleep time.
When the sleep timer operation finishes, the timer will
function to turn the source on at the preset time.
Note
Do not set the timer time so that the timer will start during
sleep timer operation. (Since sleep timer operation has
priority, the timer will not operate.)
43
90 60 30
OFF SLEEP